DEEP Property is a polygon feature-based layer that includes all land owned in fee simple interest by the State of Connecticut Department of Energy and Environmental Protection. This layer is based on information that was collected and mapped at various scales and at different levels of accuracy. Generally, partial interests such as easements or development rights are not included in this layer. The exception is flood control areas, which may include permanent easements. Types of property in this layer include parks, forests, wildlife areas, flood control areas, scenic preserves, natural areas, historic reserves, DEEP owned waterbodies, water access sites and other miscellaneous properties. This layer is current and is updated as parcels are acquired by DEEP.

Connecticut Quaternary Geology Long Island Submerged Marine Fluvial-Estuarine, Channel-Fill Deposits identifies early postglacial, channel-fill deposits submerged in Long Island Sound and Fishers Island Sound. This information appears on Sheet 1 of the The Quaternary Geologic Map of Connecticut and Long Island Sound Basin (Stone and others, 2005).
The Connecticut Quaternary Geology digital spatial data combines the information portrayed on the on-land portion of the Quaternary Geologic Map of Connecticut and Long Island Sound Basin (Stone and others 2005) with the information portrayed on its sister map, the Surficial Materials Map of Connecticut (Stone and others, 1992). When used together, these maps provide a three dimensional context for understanding and predicting the internal composition, resource potential and hydrologic character of Connecticut's glacial and postglacial deposits. Both were compiled at 1:24,000 scale, and published at 1:125,000 scale.
The Quaternary Geologic Map of Connecticut and Long Island Sound Basin (Stone and others, 2005) portrays the glacial and postglacial deposits of Connecticut (including Long Island Sound) with an emphasis on where and how they were emplaced. Glacial Ice-Laid Deposits (thin till, thick till, and deposits of individual end moraines), Early Postglacial Deposits (Late Wisconsinan to Early Holocene stream terrace and inland dune deposits) and Holocene Postglacial Deposits (alluvium, swamp deposits, marsh deposits, beach and dune deposits, talus, and artificial fill) are differentiated from Glacial Meltwater Deposits. This mapping is based on the concept of systematic northward retreat of the Late Wisconsinan glacier. Meltwater deposits are divided into six depositional system categories (Deposits of Major Ice-Dammed Lakes, Deposits of Major Sediment-Dammed Lakes, Deposits of Related Series of Ice-Dammed Ponds, Deposits of Related Series of Sediment-Dammed Ponds, Deposits of Proximal Meltwater Streams, and Deposits of Distal Meltwater Streams) based on the arrangement and character of the groupings of sedimentary facies (morphosequences).
The Surficial Materials Map of Connecticut (Stone and others, 1992) portrays the glacial and postglacial deposits of Connecticut in terms of their aerial extent and subsurface textural relationships. Glacial Ice-Laid Deposits (thin till, thick till, end moraine deposits) and Postglacial Deposits (alluvium, swamp deposits, marsh deposits, beach deposits, talus, and artificial fill) are differentiated from Glacial Meltwater Deposits. The meltwater deposits are further characterized using four texturally-based map units (g = gravel, sg = sand and gravel, s = sand, and f = fines). In many places a single map unit (e.g. sand) is sufficient to describe the entire meltwater section. Where more complex stratigraphic relationships exist, "stacked" map units are used to characterize the subsurface (e.g. sg/s/f - sand and gravel overlying sand overlying fines). Where postglacial deposits overlie meltwater deposits, this relationship is also described (e.g. alluvium overlying sand). Map unit definitions (Surficial Materials Polygon Code definitions, found in the metadata) provide a short description of the inferred depositional environment for each of the glacial meltwater map units.
The geologic contacts between till and meltwater deposits coincide on both the Quaternary and Surficial Materials maps, as do the boundaries of polygons that define areas of thick till, alluvium, swamp deposits, marsh deposits, beach and dune deposits, talus, and artificial fill. Within the meltwater deposits, a Quaternary map unit (deposit) may contain several Surficial Materials textural units (akin to facies within a delta, for example). Combining the textural and vertical stacking information from the Surficial Materials map with the orderly portrayal of morphosequence relationships, up and down valley, that can be gleaned from the Quaternary map provides a three dimension

Environmental Justice Block Groups 2021 was created from Connecticut block group boundary data located in the Census Bureau's 2019 TIGER/Line Shapefiles. The poverty data used to determine which block groups qualified as EJ communities (see CT State statute 22a-20a) was based on the Census Bureau's 2019 ACS 5-year estimate- Table C17002. This poverty data was joined with the block group boundaries in ArcMap. Block groups in which the percent of the population below 200% of the federal poverty level was greater than or equal to 30.0 were selected and the resulting selection was exported as a new shapefile. The block groups were then clipped so that only those block groups outside of distressed municipalities were displayed. Maintenance – This layer will be updated annually and will coincide with the annual distressed municipalities update (around August/September). The latest ACS 5-year estimate data should be used to update this layer.

Environmental Justice Distressed Municipalities 2021 was created from Connecticut town boundary data located in the Census Bureau's 2019 TIGER/Line Shapefiles (County Subdivisions). 

Coastal Area & Boundary Polygon:

The Coastal Area layer is a 1:24,000-scale, polygon feature-based layer that includes the land and waters that lie within the Coastal Area as defined by Connecticut General Statute (C.G.S.) 22a-94(a). Activities and actions conducted within the coastal area by Federal and State Agencies (i.e., U.S. Army Corps of Engineers (USACOE), DEP regulatory programs, and state plans and actions) must be consistent with all of the applicable standards and criteria contained in the Connecticut Coastal Management Act (C.G.S. 22a-90 to 22a-113). A subset of the Coastal Area, the Coastal Boundary, represents an area within which activities regulated or conducted by coastal municipalities must be consistent with the Coastal Management Act.
As defined in this section of the statutes, the Coastal Area includes the land and water within the area delineated by the following: the westerly, southerly and easterly limits of the state's jurisdiction in Long Island Sound; the towns of Greenwich, Stamford, Darien, Norwalk, Westport, Fairfield, Bridgeport, Stratford, Shelton, Milford, Orange, West Haven, New Haven, Hamden, North Haven, East Haven, Branford, Guilford, Madison, Clinton, Westbrook, Deep River, Chester, Essex, Old Saybrook, Lyme, Old Lyme, East Lyme, Waterford, New London, Montville, Norwich, Preston, Ledyard, Groton and Stonington. This layer includes a single polygon feature defined by the boundaries described above. Attribute information is comprised of an Av_Legend to denote the coastal area. Data is compiled at 1:24,000 scale. This data is not updated.

The Coastal Boundary layer is a 1:24,000-scale, polygon feature-based layer of the legal mylar-based maps adopted by the Commissioner of the Department of Environmental Protection (DEP) (i.e., maps were adopted on a town by town basis) showing the extent of lands and coastal waters as defined by Connecticut General Statute (C.G.S.) 22a-93(5)) within Connecticut's coastal area (defined by C.G.S. 22a-94(c)). The coastal boundary is a hybrid of the original 1:24,000 version maps prepared by DEP consistent with C.G.S. 22a-94(d) (Coastal Area) and the revised boundary mapping undertaken by twenty-two coastal towns prepared pursuant to C.G.S. 22a-94(f). This layer therefore does not replace the legal maps and may not be used for legal determinations.
The Coastal Boundary layer includes a single polygon feature that represents the coastal boundary. No other features are included in this layer. Data is compiled at 1:24,000 scale. Attribute information is comprised of an Av_Legend attribute and a CoastB_Flg attribute to denote the coastal boundary. Other attributes include automatically calculated Shape_Length and Shape_Area fields. This data is not updated.
Any regulated activity conducted within the coastal boundary by a municipal agency (i.e., plans of development, zoning regulations, municipal coastal programs and coastal site plan review (i.e., site plans submitted to zoning commission, subdivision or resubdivision plans submitted to planning commission, application for special permit or exception to the zoning or planning commissions or zoning board of appeals, variance submitted to zoning board of appeals and a referral of a municipal project)) must be conducted in a manner consistent with the requirements of the Connecticut Coastal Management Act (CMA; C.G.S. 22a-90 to 22a-113). As the Coastal Boundary is a hybrid of the Coastal Area, all state and federal agency activities must be consistent with the requirements of the CMA.
As defined in C.G.S. 22a-94(b) the coastal boundary is a "continuous line delineated on the landward side by the interior contour elevation of the one hundred year frequency coastal flood zone, as defined and determined by the National Flood Insurance Act, as amended (USC 42 Section 4101, P.L. 93-234), or a one thousand foot linear setback measured from the mean high water mark in coastal waters, or a one thousand foot linear setback

This data layer includes the information portrayed on the Surficial Materials Map of Connecticut (Stone, J.R., Schafer, J.P., London, E.H. and Thompson, W.B., 1992, U.S. Geological Survey special map, 2 sheets, scale 1:125,000). The Surficial Materials Map of Connecticut portrays the glacial and postglacial deposits of Connecticut in terms of their aerial extent and subsurface textural relationships. Glacial Ice-Laid Deposits (thin till, thick till, end moraine deposits) and Postglacial Deposits (alluvium, swamp deposits, marsh deposits, beach deposits, talus, and artificial fill) are differentiated from Glacial Meltwater Deposits. The meltwater deposits are further characterized using four texturally-based map units (g = gravel, sg = sand and gravel, s = sand, and f = fines). In many places a single map unit (e.g. sand) is sufficient to describe the entire meltwater section. Where more complex stratigraphic relationships exist, "stacked" map units are used to characterize the subsurface (e.g. sg/s/f - sand and gravel overlying sand overlying fines). Where postglacial deposits overlie meltwater deposits, this relationship is also described (e.g. alluvium overlying sand). Map unit definitions (Surficial Materials Polygon Code definitions, found in the metadata) provide a short description of the inferred depositional environment for each of the glacial meltwater map units. This map was compiled at 1:24,000 scale, and published at 1:125,000 scale.
Connecticut Surficial Materials is a 1:24,000-scale, polygon and line feature-based layer describing the unconsolidated glacial and postglacial deposits of Connecticut in terms of their grain-size distribution (texture) as compiled at 1:24,000 scale for the Surficial Materials Map of Connecticut. Glacial meltwater deposits (stratified deposits) are particularly emphasized because these sediments are the major groundwater aquifers in the State and are also the major source of construction aggregate. These deposits are described in terms of their subsurface distribution of textures as well as their extent. The texture of meltwater deposits through their total vertical thickness in the subsurface is shown to the extent that it is known or can be inferred. In some places only one textural unit (such as SG - Sand and Gravel) describes the whole vertical extent of the meltwater deposits; in other places 'stacked units' (such as SG/S/F - Sand and Gravel overlying Sand overlying Fines) indicate changes of textural units in the subsurface. Polygon features represent individual textural (surficial material) units with attributes that describe textural unit type and size. Examples of polygon features that are postglacial deposits include floodplain alluvium, swamp deposits, salt-marsh and estuarine deposits, talus, coastal beach and dune deposits, and artificial fill. Examples of glacial ice-laid deposits include till, thin till, thick till and end moraine deposits. Examples of glacial melt-water deposits include gravel, sand and gravel, sand, and very fine sand, silt and clay. Additional polygon features are incorporated to define surface water areas for streams, lakes, ponds, bays, and estuaries greater than 5 acres in size. Line features describe the type of boundary between individual textural units such as a geologic contact line between two different textural units or a linear shoreline feature between a textural unit and an adjacent waterbody. Data is compiled at 1:24,000 scale and is not updated.

This data layer includes the information portrayed on the Surficial Materials Map of Connecticut (Stone, J.R., Schafer, J.P., London, E.H. and Thompson, W.B., 1992, U.S. Geological Survey special map, 2 sheets, scale 1:125,000). The Surficial Materials Map of Connecticut portrays the glacial and postglacial deposits of Connecticut in terms of t

Lake Bathymetry describes the water depth for selected reservoirs, lakes, ponds, and coves in Connecticut. It includes depth contours, also called bathymetric contours, that define lines of equal water depth in feet. This information was collected and compiled by the State of Connecticut, Department of Environmental Protection over a period of time using a variety of different techniques and equipment including manual depth soundings, use of an electronic depth sounder in conjunction with a GPS receiver to locate the boat, and digitizing previously published bathymetry maps. Data is compiled at a variety of scales and resolutions, depending on the collection method used for a particular waterbody. A list of the waterbodies included in this layer can be viewed in the GIS Metadata for Lake Bathymetry. This information was used to publish bathymetric maps in A Fisheries Guide to Lakes and Ponds of Connecticut, Robert P. Jacobs, Eileen B. O'Donnell, and William B. Gerrish, Connecticut Department of Environmental Protection Bulletin 35, 2002, SBN 0-942085-11-6.

Connecticut and Vicinity Town Boundary data are intended for geographic display of state, county and town (municipal) boundaries at statewide and regional levels. Use it to map and label towns on a map. These data are derived from Northeastern United States Political Boundary Master layer.
This information should be displayed and analyzed at scales appropriate for 1:24,000-scale data. The State of Connecticut, Department of Environmental Protection (CTDEP) assembled this regional data layer using data from other states in order to create a single, seamless representation of political boundaries within the vicinity of Connecticut that could be easily incorporated into mapping applications as background information. More accurate and up-to-date information may be available from individual State government Geographic Information System (GIS) offices. Not intended for maps printed at map scales greater or more detailed than 1:24,000 scale (1 inch = 2,000 feet.)

It is derived from the Connecticut Route Segments layer, which is based on spatial information from the U.S. Bureau of Census that was published for Connecticut by the University of Connecticut, Center for Geographic Information and Analysis. The spatial information (line feature geometry) from the U.S. Bueau of Census was compiled for the year 2000 and used to create a continuous line feature for each interstate highway and route shown on the State Tourism Map 2002-2003 published by the Connecticut Department of Transportation. The Connecticut Routes layer does not include local roads, highway entrance and exit ramps, highway rest areas, exit numbers, house address, traffic direction, or traffic volume information. Features are linear and represent divided and undivided route centerlines mapped at 1:100,000 scale (1 inch = 1.578 mile).

Connecticut Hydrography Set:

Connecticut Hydrography Line includes the line features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of streams or location of shorelines impacted by natural events or changes in development since the time the USGS 7.5 minute topographic quadrangle maps were published. Attribute information is comprised of codes to identify hydrography features by type, cartographically represent (symbolize) hydrography features on a map, select waterbodies appropriate to display at different map scales, identify individual waterbodies on a map by name, and describe feature area and length. The names assigned to individual waterbodies are based on information published on the USGS 7.5 minute topographic quadrangle maps or other state and local maps. The layer does not include bathymetric, stream gradient, water flow, water quality, or biological habitat information. This layer was originally published in 1994. The 2005 edition includes the same water features published in 1994, however some attribute information has been slightly modified and made easier to use. Also, the 2005 edition corrects previously undetected attribute coding errors.

Connecticut Hydrography Polygon includes the polygon features of a layer named Hydrography. Hydrography is a 1:24,000-scale, polygon and line feature-based layer that includes all hydrography features depicted on the U.S. Geological Survey (USGS) 7.5 minute topographic quadrangle maps for the State of Connecticut. This layer only includes features located in Connecticut. These hydrography features include waterbodies, inundation areas, marshes, dams, aqueducts, canals, ditches, shorelines, tidal flats, shoals, rocks, channels, and islands. Hydrography is comprised of polygon and line features. Polygon features represent areas of water for rivers, streams, brooks, reservoirs, lakes, ponds, bays, coves, and harbors. Polygon features also depict inundation areas, marshes, dams, aqueducts, canals, tidal flats, shoals, rocks, channels, and islands shown on the USGS 7.5 minute topographic quadrangle maps. Line features represent single-line rivers and streams, aqueducts, canals, and ditches. Line features also enclose all polygon features in the form of natural shorelines, manmade shorelines, dams, closure lines separating adjacent waterbodies, and the apparent limits for tidal flats, rocks, and areas of marsh. The layer is based on information from USGS topographic quadrangle maps published between 1969 and 1984 so it does not depict conditions at any one particular point in time. Also, the layer does not reflect recent changes with the course of stream

Surface Water Quality Classifications Set:

This dataset is a line and a polygon feature-based layer compiled at 1:24,000 scale that includes water quality classification information for surface waters for all areas of the State of Connecticut. The Surface Water Quality Classifications and the Ground Water Quality Classifications are usually presented together as a depiction of water quality classifications in Connecticut. Water Quality Classifications, based on the adopted Water Quality Standards, establish designated uses for surface and ground waters and identify the criteria necessary to support those uses. This edition of the Surface Water Quality Classifications is based on the Water Quality Standards adopted on February 25, 2011.
Surface Water means the waters of Long Island Sound, its harbors, embayments, tidal wetlands and creeks; rivers and streams, brooks, waterways, lakes, ponds, marshes, swamps, bogs, federal jurisdictional wetlands, and other natural or artificial, public or private, vernal or intermittent bodies of water, excluding groundwater. The surface waters includes the coastal waters as defined by Section 22a-93 of the Connecticut General Statutes and means those waters of Long Island Sound and its harbors, embayments, tidal rivers, streams and creeks, which contain a salinity concentration of at least five hundred parts per million under the low flow stream conditions as established by the Commissioner of the Department of Environmental Protection. The Surface Water Quality Classes are AA, A, B, SA and SB. All surface waters not otherwise classified are considered as Class A if they are in Class GA Ground Water Quality Classifications areas. Class AA designated uses are: existing or proposed drinking water, fish and wildlife habitat, recreational use (maybe restricted), agricultural and industrial supply. Class A designated uses are: potential drinking water, fish and wildlife habitat, recreational use, agricultural and industrial supply. Class B designated uses are: fish and wildlife habitat, recreational use, agricultural and industrial supply and other legitimate uses including navigation. Class B* surface water is a subset of Class B waters and is identical in all ways to the designated uses, criteria and standards for Class B waters except for the restriction on direct discharges. Coastal water and marine classifications are SA and SB. Class SA designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for direct human consumption, recreation and other legitimate uses including navigation. Class SB designated uses are: marine fish, shellfish and wildlife habitat, shellfish harvesting for transfer to approved areas for purification prior to human consumption, recreation and other legitimate uses including navigation.
There are three elements that make up the Water Quality Standards which is an important element in Connecticut's clean water program. The first of these is the Standards themselves. The Standards set an overall policy for management of water quality in accordance with the directive of Section 22a-426 of the Connecticut General Statutes. The policies can be simply summarized by saying that the Department of Environmental Protection shall: Protect surface and ground waters from degradation, Segregate waters used for drinking from those that play a role in waste assimilation, Restore surface waters that have been used for waste assimilation to conditions suitable for fishing and swimming, Restore degraded ground water to protect existing and designated uses, Provide a framework for establishing priorities for pollution abatement and State funding for clean up, Adopt standards that promote the State's economy in harmony with the environment. The second element is the Criteria, the descriptive and numerical standards th